The following article will guide you through using the C99-T10 contenary cantilevers in Lineardraft, by providing you with:
- An annotated example with all limits for user adjustable values
- The system height and reach ranges for using the cantilevers in your design
C99-T10-501 Pull Off Cantilevers
Design Limits
Please note: Where design limits are not available on the drawing, design limits have been provided externally, these are marked in bold.
Standard:
- Minimum System Height: 360mm
- Maximum System Height: 800mm
- Minimum Reach: 1650mm
- Maximum Reach: 3100mm
C99-T10-511 Push Off Cantilevers
Design Limits
Please note: Where design limits are not available on the drawing, design limits have been provided externally, these are marked in bold.
Standard:
- Minimum System Height: 360mm
- Maximum System Height: 800mm
- Minimum Reach: 1000mm
- Maximum Reach: 3100mm
C99-T10-601 Contenary Only Pull Off Cantilevers
Design Limits
Please note: Where design limits are not available on the drawing, design limits have been provided externally, these are marked in bold.
Standard:
- Minimum System Height: 185mm
- Maximum System Height: 410mm
- Minimum Reach: 1650mm
- Maximum Reach: 3100mm
C99-T10-611 Contenary Only Push Off Cantilevers
Design Limits
Please note: Where design limits are not available on the drawing, design limits have been provided externally, these are marked in bold.
Standard:
- Minimum System Height: 185mm
- Maximum System Height: 410mm
- Minimum Reach: 1000mm
- Maximum Reach: 3100mm