Adjusting Wires for an MPA on Gantry

If you are placing an MPA on a gantry you will be unable to directly adjust the messenger wire or system height

The messenger wire height is fixed for an MPA on gantry, as it must attach the supporting equipment at a specific point relative to the gantry. Changes to the system height would also move the messenger wire, therefore Lineardraft will not allow you to make any adjustments to this value either. 

Instead, you should adjust the contact wire to achieve the required system height.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.