The below instructions outline how to make changes to a gantry for a structure you have already placed.
Edit a Gantry
Step 1: Click the 'Edit' button in the 'Structure' section of the Lineardraft toolbar
This will open the structure selection window.
Step 2: Click on the structure you want to edit and click 'Edit'
Alternatively, you can select your structure from the drop-down menu. Clicking 'Edit' will open the 'Edit Structure' window.
Step 3: Configure the gantry
You can change the gantry type from the drop-down, and change the length and height of the gantry using the up/down arrows as needed.
Step 4: Click 'Update Structure'
This will close the 'Edit Structure' window. Your changes will now be visible in 3D and Plan View
Edit a Gantry with Equipment
Step 1: Click the 'Edit' button in the 'Structures' section of the Lineardraft toolbar
This will open the structure selection window.
Step 2: Click on the structure you want to edit and click 'Edit'
Alternatively, you can select your structure from the drop-down menu. Clicking 'Edit' will open the 'Edit Structure' Window.
Step 3: Configure the gantry type, if necessary
Clicking the drop-down menu to select a new gantry type will open up the 'Steelwork Configurator' dialog. From there you can select a new gantry without affecting your wire supports or backties. Learn more here.
Step 4: Review or adjust any automatic adjustments to equipment
If the equipment or ornaments you have attached to your gantry are no longer applicable with your new gantry choice, Lineardraft may have automatically updated to a similar piece of equipment. You can view and adjust the new equipment or ornaments in the drop-down menus.
More info: To learn more about how to use the steelwork configurator, see here.
Step 5: Click 'Apply'
This will close the 'Steelwork Configurator' dialog.
Step 6: Continue to configure the gantry
Make changes to the height and length of the gantry by overtyping in the box or using the up/down arrows.
Step 7: Click 'Update Structure'
This will close the 'Edit Structure' window and your changes will now be visible in the 3D and plan views.
